Guides

How to invoice a property management company (and get paid sooner)

What property management AP needs on every flooring invoice, where to send it, and how to follow up without souring the account.

By Derek Spohn · Last reviewed November 2026 · 8 min read

In this guide

The short answer

Send one invoice per work order, the day the job is done, to the accounts payable inbox or portal the management company named. Put the PO or work order number, the property, the unit, the work, the date and an amount that matches the approved quote on it. Most slow payments on turns come from an invoice that can’t be matched, sits in the wrong inbox, or belongs to a vendor whose papers have lapsed, so fix those three and the check comes sooner.

What accounts payable needs on every invoice

One property manager wrote online that they got 40 vendor and utility bills in a day for the hundreds of units they manage. Accounts payable (AP) matches each bill to a work order and a property, routes it for approval, and pays it in a check run. Anything they must look up goes to the bottom.

Put these on every invoice:

  1. PO or work order number, exactly as the property issued it.
  2. Bill-to name. Ask at setup. Some want the management company, some want the owner entity “care of” the management company.
  3. Property name and address, plus the unit number.
  4. Description of work in plain terms: “Replace carpet and pad, 2-bed, 62 SY” beats “Flooring.”
  5. Dates: the date the work was finished and the invoice date.
  6. Line items for carpet or LVP, pad and sundries, and labor, priced the same way as the approved quote, so the manager can see it matches without opening the quote.
  7. Total, terms and how to pay: net 30, your remit address, and whether you take ACH.
  8. Before and after photos if asked, so the manager can forward it to the owner as-is.

Sales tax on flooring material and labor varies by state, so check yours.

Per unit, per property or consolidated

  • Per unit. One invoice per work order. It’s the easiest for AP to match and lets the property charge the cost to that unit’s make ready. For turns, it’s the default.
  • Per property. One invoice per property per period, with each unit as a line. Fewer bills, but one disputed unit can hold up the whole invoice.
  • Consolidated. One invoice across several properties the company manages. Each property often has its own owner and bank account, so AP has to split it before paying. Only do this when they ask.

A good middle path is per-unit invoices plus a monthly statement per property listing every open invoice, so AP has one page to check against. Ask AP which they want, and get the answer in an email.

Approvals and sign-off

Payment problems often start before the work does.

  • Work order or PO before you start. If the property issues them, don’t roll out carpet without one.
  • Watch the not-to-exceed (NTE) amount. Many work orders carry one. AP holds anything billed over the NTE until someone approves the difference.
  • Know the approval limit. Many managers can approve up to a set amount, and anything over it waits for the owner. So does the invoice.
  • Changes in writing, before the work. Found rotted subfloor under the vinyl? Send a photo and a price, get a yes by email or a revised work order, then do it. An add nobody approved is the line AP will hold.
  • Sign-off at completion. When they walk the unit, note who signed off and the date, on the invoice or in the job notes.

Vendor papers: W-9, insurance and credentialing portals

AP can’t pay a vendor who isn’t set up, and they often stop paying one whose papers lapse. Have these ready before the first call:

  • W-9 with your legal business name and tax ID, matching the name on your invoices.
  • Certificate of insurance (COI) showing the limits the management company requires. Many ask to be named as additional insured, and some want the owner named too. Being listed on the certificate isn’t coverage by itself, so managers usually want the additional insured endorsement from your carrier, often with proof of workers’ comp. Send a new certificate before the old policy expires. One expired line can freeze your payments until your file is current again.
  • Contractor or business license where your state or city requires one.
  • ACH form, if they offer it, to cut mailing time.

Many larger management companies use a third-party vendor credentialing service. You upload your papers and the service checks them against the company’s requirements. Some charge the vendor a fee for each management company, and some don’t refund it if your coverage falls short, so read the requirements before you pay. A lapsed status can block new work and payment.

Send it to the right place

Ask AP exactly where invoices go: an email address, an upload portal, or both. The manager who signed the work order is often the wrong place. Their inbox fills up and invoices don’t get forwarded.

  • Send one invoice per PDF, with the invoice number, property and unit in the file name.
  • Use AP’s subject line, or “Invoice 1043, Maple Ridge, Unit 212, WO 5534.”
  • If they use a portal, upload there and skip the email copy. Duplicates slow things down.

Net 30 on paper, and what really happens

Most management companies agree to net 30. Vendors to apartment communities often say they get paid in 60 to 90 days, and sometimes 90 to 120. A few reasons the calendar runs long:

  • The 30 days often start when AP enters the invoice, days after you sent it.
  • Approval passes through several people, and one of them is usually out.
  • Checks go out on a set schedule, often once or twice a month, with a cutoff.

At setup, ask AP when the check run is and what the cutoff is, then bill to land before it.

In our shop, the average was about 35 days when we pushed on collections, and it crept toward 45 when we didn’t. A few properties ran 60 to 90 days unless we hounded them, and keeping track of those follow-ups was a nightmare.

Following up without burning the relationship

The manager who pays you slowly also books your next 30 turns. Keep follow-ups short, factual and scheduled, so they never feel personal.

  1. At 7 days, ask AP to confirm the invoice is entered and approved. “Can you confirm invoices 1042 to 1048 are in your system? Happy to resend anything.”
  2. At the due date, send the statement for that property.
  3. At 15 days past due, call AP with the list and ask what’s holding each one.
  4. At 30 days past due, let the property manager know, politely, with the statement attached. They can often unstick an approval with one email.

Lien rights and deadlines vary by state and can start running early. Check your state before you need them.

Most of our unpaid invoices weren’t really lost. Property managers are busy and juggling budgets, and “I never got it, can you send it again?” buys them time. A read receipt and a scheduled reminder make that conversation much easier.

Worked example: a month of turns at one property

All numbers here are an example. Say you do turns at a 200-unit community we’ll call Maple Ridge. The approved price list:

  • 1-bed carpet and pad, 45 SY at $22.50 per SY: $1,012.50
  • 2-bed carpet and pad, 62 SY at $22.50 per SY: $1,395.00
  • 2-bed LVP in kitchen and bath, 180 SF at $5.75 per SF: $1,035.00
  • Carpet patch: $185.00 flat

In October you finish seven work orders. Each gets its own invoice the day it’s done:

  1. Unit 104, WO 5521, Oct 3, 1-bed carpet: $1,012.50
  2. Unit 212, WO 5534, Oct 7, 2-bed carpet: $1,395.00
  3. Unit 218, WO 5540, Oct 9, 2-bed carpet plus LVP: $1,395.00 + $1,035.00 = $2,430.00
  4. Unit 307, WO 5562, Oct 14, carpet patch: $185.00
  5. Unit 115, WO 5571, Oct 16, 1-bed carpet: $1,012.50
  6. Unit 220, WO 5588, Oct 21, 2-bed carpet plus a subfloor patch, priced at $95 and approved by email Oct 20: $1,395.00 + $95.00 = $1,490.00
  7. Unit 309, WO 5603, Oct 28, 2-bed LVP: $1,035.00

October total: $1,012.50 + $1,395.00 + $2,430.00 + $185.00 + $1,012.50 + $1,490.00 + $1,035.00 = $8,560.00.

Every line matches the price list, and the one add has a dated approval. On Oct 31 you send a one-page statement listing all seven.

Now the timing. Unit 104 was finished Oct 3. Billed that day on net 30, it’s due Nov 2. Held for a month-end batch on Oct 31, it’s due Nov 30, 58 days after the work. Same-day billing saves 28 days before AP even starts.

And the cash. If this property really pays in about 60 days, you’re carrying about two months of its work at any time: $8,560.00 times 2 = $17,120.00 of billings outstanding. The material and labor inside that number is cash you’ve already paid out.

Common mistakes

  • Invoicing without the PO or work order number.
  • Billing a price that doesn’t match the approved quote, even by a little.
  • Doing extra work on a verbal yes.
  • Letting a certificate of insurance expire.
  • Following up angry, or not at all.

Checklist

  • W-9, COI and any credentialing portal status are current.
  • You know the bill-to name, the AP address or portal, the check run and the cutoff.
  • Every job has a work order or PO before it starts.
  • Changes are approved in writing before the work.
  • Each invoice shows PO, property, unit, work, dates and amounts that match the quote.
  • Invoices go out the day the job is done, one PDF each.
  • Follow-ups at 7 days, the due date, 15 past due and 30 past due.

How Turn One handles this

In Turn One, finished jobs land on a ready-to-invoice list, so you bill the job the day it’s done, and the PDF carries the property, the unit and the job number, and you email it from the job. You post the management company’s check to every invoice it covers in one click and see what you’re owed, by age and by customer. More on the Invoicing page.

Derek Spohn built a multifamily flooring company from scratch to more than 20 crews. He started Turn One. Questions or a correction? Email contact@getturnone.com.

Built for the turn.